2021 PowerPlasma 62i CNC Capable 60 Amps Plasma Cutter with IPT-60 torch

Description

Power i-TIG 200T
Home
About Us
Contact Us
Shop Policies
FAQ
Feedback
SKU:
PowerPlasma-62i
Product Description
If you are wanting more power, unquestionable cut quality, and reliabilty in a plasma cutter, but you just can't justify spending your green for something that is gray, the PowerPlasma 62i is the answer.  As the all new replacement for the ever popular PowerPlasma 60S, the PowerPlasma 62i has been built around a reliable, tested all digital inverter platform.  This allows the unit to do more with less circuitry and points of failure than ever before.  This plasma cutter though has kept all of the old features and added many new ones, so nothing was sacrificed in the way of features.  The display has been upgraded to offer large, easy to read numbers even in bright light.  The new addition of digital readouts for both the Post-Flow time and the Air-Pressure has added to the plasma cutter's operator oriented design.  Along with a digital display for the air pressure, the unit features an color coded LED guide system that helps you to properly set the air pressure for each cut mode without having to refer to a chart or manual.  A new gouge feature has been added for cutting out metal defects and old welds.  Also, a separate function has been added for CNC operation.
PRODUCT EXTRAS
Features & Benefits:
Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
NEW!
Digitally controlled design that closely manages cutting arc
NEW!
Super bright displays, readable in bright light conditions
NEW!
Gouge function
Cuts virtually any type of metal with ease
Simple to use torches with inexpensive service parts and consumables
Commercial class, 60% Duty cycle at 60 amps
Clean, smooth cuts with the genuine iPT 60 Torch
Blowback start starts are fast and reliable
Pilot arc improves performance and cutting on dirty, painted, or rusted metals
3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of continuous operation if no cutting is present to prevent premature consumable wear
Digital Air Pressure Display, and LED Air Pressure guide system adapts to different cut modes for best air pressure setting without consulting a manual or chart
Self-diagnosing
Adjustable postflow timer with digital display for maximum consumable life and ease of use.
The name brand IGBT's are digitally controlled which increases cut quality and consumable life.
CNC socket and new, separate CNC cut mode for CNC use on plasma tables (machine torch optional)
Suitable for use with 11,000 W "clean power" generators.
WHAT'S INCLUDED
Standard Equipment:
15ft. Italian designed and patented iPT-60 torch with Euro quick-connect central adapter
Work clamp with 10ft. cable and DINSE connector
Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
Consumable starter kit
OPTION
Optional Equipment:
iPT 60 CNC torch
Welding cart
Consumable kit
RECOMMENDED USES
Recommended Areas of Use:
Home shop
Automotive/muffler shops
Motosports
Farm/Ranch
Commercial fabrication
Factory maintenance
Shipyards
Pipelines
HVAC
CNC
Recommended Metals:
Steel
Stainless
Aluminum
Copper
Titanium
Nickel/Nickel alloys
Virtually any metal including cast iron
TECH SPECS
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-60A; 88-104V
OCV:
240V
Max Inrush ( I1MAX ) Amps:
41A
Maximum Rated (I1EFF ) Input Amps:
32.4A
Duty Cycle At Rated Amps/Volts:
60% @ 60A/104V
100% @ 50A/100V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
Italian designed iPT 60
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium
Recommended Cutting Air Pressure:
75 psi
Recommended Compressor Capacity:
6CFM @ 90 psi/ 30 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
NOTES
Notes:
To improve consumable life and prevent torch damage, the customer must supply and install a separate air dryer inline in addition to the regulator/water trap supplied by Everlast. The water trap Everlast supplies with the unit is not designed to remove all moisture from the air.
When using on a generator, the generator must be "clean power" rated by its manufacturer, which is 5% or less Total Harmonic Distortion (THD).  Failure to operate on a clean power rated generator will damage the unit and void the warranty.  For more generator information and recommendations, consult the manual.
If operating on a generator, the generator must be certified by its manufacturer to have "clean power" output. Use a generator that is rated for a minimum of 10,000 surge watts.
MINIMUM/MAXIMUM
Up to 3/4" daily use @ 15-20 ipm
Up to 1" clean cut @ 8-12 ipm
Up to 1 1/4" severance cut @ 3-5 ipm
Pierce up to 1/2"
Plasma cutting capacity is affected by several factors.  Ideal cutting conditions require dry air, new consumables, proper air pressure etc.   Quality of cut depends upon consumable orifice size, standoff height,  and travel speed.
Returns
For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information:
1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)